How Often Should You Change Your Water Filter? (Melbourne Guide)
Most water filter cartridges need replacing every 6 to 12 months. See how long each filter type lasts, the signs yours is overdue, and what happens if you leave it in too long.
On This Page

For most people, a water filter crosses their mind twice: the day it’s installed and the day the water starts tasting off.
By the time the water starts tasting funnie, the filter probably stopped working months ago. This guide will tell you how long filters last and the signs that indicate your filter needs to be changed.
The Short Answer: Replace Every 6 to 12 Months
Most cartridges need to be replaced every 6 to 12 months. How often yours needs to be replaced depends on how many people live in your house and how much water your household uses.
Water Filter Lifespan by Filter Type
- Sediment cartridge: 6-12 months
- Carbon cartridge (under-sink): 6-12 months
- RO pre-filters: 6-12 months
- RO membrane: 2-3 years
- Remineralizing or alkaline cartridge: 6-12 months
- Whole-house sediment cartridge: 6-12 months
- Whole-house carbon filter: 12 months or more, depending on size
- Benchtop or jug filter: 1-3 months
What Affects How Long a Water Filter Lasts?
- How many people are in your household. A larger family uses a water filter more.
- How much water is used. Is all water used by your household by filtered? Does your household cook and drink by using water from the filtered tap?
- The more water is used by your household by the filter, the faster the filter cartridges need to be changed.
- What’s coming in from the mains. Melbourne water is fairly clean and soft. But something like mains works or a burst pipe can stir up sediment, and that will clog a filter faster.
- The size and quality of the cartridge. Larger and better cartridges tend to last longer.
5 Signs Your Water Filter Needs Replacing
- You get that chlorine taste or smell back. That is what we hear about the most. That means the carbon has been saturated and is no longer working.
- There is an issue with the flow of your tap water. That usually means the sediment filter is clogged.
- Your shower feels like it has less pressure. That means a clogged filter is reducing the water pressure for the entire house.
- The water is cloudy. There are sediment particles in the water.
- You don’t know when it was last changed. If it’s been over a year, it’s definitely due.
What Happens If You Don’t Change Your Water Filter?
- You pay for a filter that isn’t filtering. If a cartridge is full of chlorine, it passes right through.
- Water pressure goes down. A sediment cartridge can slow the entire system.
- Bacteria can grow on the cartridge. A full carbon cartridge won’t strip the chlorine like it’s supposed to, and bacteria can grow on it. By then, what comes out of the filter is probably worse than what comes out of the tap.
- The RO membrane can become damaged. The carbon pre-filter in an RO system protects the membrane from chlorine. Once the pre-filter is used up, the membrane is damaged by the chlorine and a new membrane costs a lot more than a pre-filter.
Can You Replace a Water Filter Cartridge Yourself?
Yes, it is usually possible to replace the cartridges yourself. Many under-sink filters use cartridges that can be removed by hand in about ten minutes. The general procedure is:
- Shut off the water to the filter.
- Open the faucet to let the pressure out.
- Remove the old cartridge and put in the new cartridge.
- Open the water slowly and check for leaks.
- Run the water a few minutes to flush the new cartridge.
When to Call a Professional Instead
- Any RO system, since there are usually a number of stages and the system usually needs sanitizing.
- Any whole-house system, since the housings are big and heavy and usually sit on your main water line.
- Anything that is leaking or the housing is cracked and/or is not opening easily.
- Any system where the brand of the cartridge is not known, since using the wrong cartridge can result in the sealing of the cartridge.
Always Use the Correct Replacement Cartridge
Use a replacement cartridge that is designed for the system or one that is compatible and tested against a recognized standard. The cheap, no name cartridges do not always seal properly and allow the water to pass around the cartridge instead of through it, and nothing is wrong with the system from the outside.
Water Filter Servicing and Replacement Across Melbourne
Forget about it. That’s what we’re here for. Our staff will remind you when it’s time to change your filter and book the service for you.
We service all of Melbourne and offer the following:
- timely filter replacements
- full system services and membrane checks
- performance checks
- service bookings
- simple phone consults
Call +61 420 338 681 if you’d like to book a service and aren’t sure when your filter was last changed. Mention your system brand and model and we’ll bring the right parts.
Frequently Asked Questions
Is it possible to have a filter that makes water worse than tap water?
Yes, it is. Bacteria can build up on a filter over time, and that's the main reason for replacing the filter.
Do I need to change all of the cartridges at once?
You do not have to change all of the cartridges at the same time. Each cartridge has its own lifespan. It is best practice on RO systems to change the pre-filters together, because they protect the membrane.
How can I tell which cartridge is in my system?
Check the housing or the manual for labeling. If you can't find it, take a picture of your system and send it to us for identification.
Ecovera Team
Water Filtration Specialists
The Ecovera team designs, installs and maintains water filtration, air conditioning and solar battery systems for Australian homes.

Upgrade your home with smarter, cleaner & more sustainable solutions.
Licensed installation, premium filtration and years of support — starting with a free, no-obligation consultation for your family.
